If the bottom pit of the household elevator is too depth, it must be back to the standard depth or the depth within 100 mm in the standard depth. So the household elevator that opens the door needs to pay attention to the direction of the door, especially the principle of opening the door. Because the opening direction is determined to determine the hoistial arrangement of the elevator, the direction is faulty.
The inner wall of the wellway requires that the general drawing is required, but in fact the concrete well wall does not need (unless the wall of the Residential elevator Suppliers brick body), this is conducive to reducing noise, but keeps flatness, no foreign objects; 3 The door of the brick-blended structure, if there is only a small number of beams on the door of the hall, it cannot meet the installation requirements of the household elevator hall, and the user must do two steel splints above the door.
Brick-concrete-specific home villa elevator hole, brick-concluded structure is not suitable for doing home villa elevator hoist, the root cause is the wellway of this structure, the rails and the car can't be hungry, so when it is not completed To make a beam, three-sided arrangement at a high level, disconnected on the door of the elevator door, and the height spacing of the beam center is based on the product model of the elevator manufacturer. Some problems need to be avoided during the production and installation of household elevator holes, then what problems do household elevator masks to avoid?
Next, the elevator manufacturers will introduce you to this knowledge, let's take a look. The ultra-shallow under the bottom pit should be recommended to dig deep to the standard depth, followed by increasing the top floor height, such as increasing a step method, and finally consider reducing the elevator speed; 5.While buying and post-maintenance, household elevators need to be paid attention to in purchase and later maintenance. The bottom pit is too deep or too shallow